– One moment, please

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Thanks for your feedback, it derected us improve the site. There is an error on vmware. When the host CPU frequency changes, the Guest system clock runs too quickly or too slowly, but may also render the whole Guest unbootable. This release of VMware Workstation Pro addresses the following issues: Workstation does not handle paths appropriately.
 
 

vSphere unsupported CPUs and ESXi hardware requirements – 4sysops.

 

A virtual machine is a software implementation of a computer. The oVirt environment enables you to create virtual desktops and virtual servers. Virtual machines consolidate computing tasks and workloads. In traditional computing environments, workloads usually run on individually administered and upgraded servers. Virtual machines reduce the amount of hardware and administration required to run the same computing tasks and workloads.

However, the user interface differs between each portal, and some administrative tasks require access to the Administration Portal. Tasks that can only be performed in the Administration Portal will be described as such in this book. Which portal you use, and which tasks you can perform in each portal, is determined by your level of permissions. Virtual machine permissions are explained in Virtual Machines and Permissions. For information on customizing the operating systems, see Configuring operating systems with osinfo.

For information on the parameters that oVirt virtual machines can support, see Enterprise Linux technology capabilities and limits and Virtualization limits for oVirt.

A console is a graphical window that allows you to view the start up screen, shut down screen, and desktop of a virtual machine, and to interact with that virtual machine in a similar way to a physical machine.

In oVirt, the default application for opening a console to a virtual machine is Remote Viewer, which must be installed on the client machine prior to use. The Remote Viewer application provides users with a graphical console for connecting to virtual machines. Once installed, it is called automatically when attempting to open a SPICE session with a virtual machine.

Alternatively, it can also be used as a standalone application. Remote Viewer is included in the virt-viewer package provided by the base Enterprise Linux Workstation and Enterprise Linux Server repositories. Open a web browser and download one of the following installers according to the architecture of your system.

Installing usbdk requires Administrator privileges. Note that the previously supported USB Clerk option has been deprecated and is no longer supported. Create a virtual machine. You must add a virtual disk for storage, and a network interface to connect the virtual machine to the network. Start the virtual machine and install an operating system.

Enable the required repositories for your operating system. Install guest agents and drivers for additional virtual machine functionality. When creating a new virtual machine, you specify its settings. You can edit some of these settings later, including the chipset and BIOS type. Click Compute Virtual Machines.

See Configuring Ignition. Add storage to the virtual machine: under Instance Images , click Attach or Create to select or create a virtual disk.

You can accept the default settings for all other fields, or change them if required. Connect the virtual machine to the network. Add a network interface by selecting a vNIC profile from the nic1 drop-down list at the bottom of the General tab. In the Boot Options tab, choose the First Device that the virtual machine will use to boot.

The new virtual machine is created and displays in the list of virtual machines with a status of Down. Ignition is the utility that is used by Enterprise Linux CoreOS to manipulate disks during initial configuration.

It completes common disk tasks, including partitioning disks, formatting partitions, writing files, and configuring users. On first boot, Ignition reads its configuration from the installation media or the location that you specify and applies the configuration to the machines. Once Ignition has been configured as the initialization method, it cannot be reversed or re-configured. In the Initial Run tab, select the Ignition 2.

Expand the Authorization option, enter a hashed SHA password, and enter the password again to verify. This script will run on the virtual machine when it starts. The scripts you enter in this field are custom JSON sections that are added to those produced by the Engine, and allow you to use custom Ignition instructions.

When you use an Ignition script, the script instructions take precedence over and override any conflicting Ignition settings you configured in the UI. Click Compute Virtual Machines and select a virtual machine with a status of Down.

The Status of the virtual machine changes to Up , and the operating system installation begins. Open a console to the virtual machine if one does not open automatically. A virtual machine will not start on a host with an overloaded CPU. See Scheduling Policies in the Administration Guide for more information. Make sure that hard disk is selected in the boot sequence, and the disk that the virtual machine is booting from must be set as Bootable.

Create a new virtual machine with a local boot disk managed by oVirt that contains the OS and application binaries. To resolve this issue:. To allow other users to connect to the VM, make sure you shutdown and restart the virtual machine when you are finished using the console.

Alternatively, the administrator can Disable strict user checking to eliminate the need for reboot between users. Install Remote Viewer if it is not already installed. See Installing Console Components. Click Compute Virtual Machines and select a virtual machine. Click Console. By default, the browser prompts you to download a file named console. When you click to open the file, a console window opens for the virtual machine.

You can configure your browser to automatically open these files, such that clicking Console simply opens the console. If more than seconds elapse between the time the file is downloaded and the time that you open the file, click Console again. Automatically connecting to a Virtual Machine. The Engine acts as a proxy for the connection, provides information about virtual machine placement, and stores the authentication keys.

You can access serial consoles for only those virtual machines for which you have appropriate permissions. To access the serial console of a virtual machine, the user must have UserVmManager , SuperUser , or UserInstanceManager permission on that virtual machine.

These permissions must be explicitly defined for each user. It is not enough to assign these permissions to Everyone. The serial console is accessed through TCP port on the Engine. This port is opened during engine-setup on new installations. Rule «M3» for the Engine firewall. Rule «H2» for the host firewall. The serial console relies on the ovirt-vmconsole package and the ovirt-vmconsole-proxy on the Engine and the ovirt-vmconsole package and the ovirt-vmconsole-host package on the hosts.

These packages are installed by default on new installations. To install the packages on existing installations, reinstall the hosts. Do not duplicate them. On the client machine from which you are accessing the virtual machine serial console, generate an SSH key pair. In the Administration Portal or the VM Portal, click the name of the signed-in user on the header bar and click Options.

This opens the Edit Options window. If a single virtual machine is available, this command connects the user to that virtual machine:.

If more than one virtual machine is available, this command lists the available virtual machines and their IDs:. If the serial console session is disconnected abnormally, a TCP timeout occurs. Once you have logged in, you can automatically connect to a single running virtual machine.

This can be configured in the VM Portal. Click the pencil icon beside Console and set Connect automatically to ON. The next time you log into the VM Portal, if you have only one running virtual machine, you will automatically connect to that machine.

To install packages signed by Red Hat you must register the target system to the Content Delivery Network. Then, use an entitlement from your subscription pool and enable the required repositories.

Register your system with the Content Delivery Network, entering your Customer Portal user name and password when prompted:. When a system is attached to a subscription pool with multiple repositories, only the main repository is enabled by default.

Others are available, but disabled. Enable any additional repositories:. For versions of Enterprise Linux earlier than 8, use the command yum update instead of dnf upgrade :.

See also Cannot perform yum update on my RHV manager ansible conflict. The oVirt guest agents, tools, and drivers provide additional functionality for virtual machines, such as gracefully shutting down or rebooting virtual machines from the VM Portal and Administration Portal. The tools and agents also provide information for virtual machines, including:. The guest agents, tools and drivers are distributed as an ISO file that you can attach to virtual machines.

You need to install the guest agents and drivers on a virtual machine to enable this functionality for that machine. Paravirtualized network driver provides enhanced performance over emulated devices like rtl.

 

Vmware workstation 14 unsupported cpu detected free –

 

Install the correct dependencies:. If it shows Unable to install all modulesplease try Cannot load Module vmmon. It is also necessary to install the appropriate headers package s for your installed kernel s нажмите для деталей for example linux-headers or linux-lts-headers. For vmware-workstation AURstart vmware-networks-configuration. If it loads for too long without response, please try Cannot load Module vmmon.

VMware Workstation The older versions presented in this article and their natively supported kernels are as follows: For VMware bundle versions, a collection of patches needed for the VMware host modules to build against recent kernels can be found from the vmware-host-modules GitHub repository.

Add this service as f1 2007 pc game free download full version, if you want to connect to your VMware Workstation installation from another Workstation Server Console:. After which you can enable them on boot.

Vmware workstation 14 unsupported cpu detected free vmware-workstation-server. After enabling Accelerate 3D graphicsthe log may show something like:. If your driver is unsupported, you might see a message like this in the log:.

If your Vulkan driver is blacklisted, you might have vmware workstation 14 unsupported cpu detected free add mks. See also Improving performance. This article or section is a candidate for merging with Improving performance. To disable them for the current session, run on the host :.

You can also use madvise instead of never to still allow applications that are optimized for transparent hugepages to obtain the performance benefits [1]. This does the same for vmware as above. If you are certain you have enough spare memory, you can ensure the guest OS writes its memory directly to the host’s RAM by adding the following to the VM’s.

Animate windows 10 these settings are not in the virtual machine’s configuration, the paravirtual SCSI adapter can still be enabled. Ensure that the paravirtual SCSI adapter is included in the kernel image by modifying the mkinitcpio. Regenerate vmware workstation 14 unsupported cpu detected free initramfs. Shut down the virtual machine and change the SCSI adapter: vmware workstation 14 unsupported cpu detected free the.

VMware offers multiple network adapters for the guest OS. This Intel adapter is generally compatible with the built-in drivers across most operating systems, including Arch.

For more performance and additional features such as multiqueue supportthe VMware native vmxnet3 network adapter can be used. Arch has the vmxnet3 kernel module available with a default посмотреть еще. Once enabled in mkinitcpio or if it is auto-detected; check by running lsmod grep vmxnet3 to see if it is loadedshut down and change the network adapter type in the.

After changing network adapters, the network and dhcpcd settings will need to be updated to use the new adapter name and MAC address. Vmware’s KB provides the following optimizations:. Install the headers linux-headers.

If not using the systemd service to automatically vmware workstation 14 cant run on windows 10 free the services, you need to manually start the vmware-usbarbitrator binary as root each time. VMware Workstation provides the possibility to remotely manage Shared VMs vmware workstation 14 unsupported cpu detected free the vmware-workstation-server service. To fix sound quality issues or enabling proper HD audio output, first run:.

If interested in playing 5. Finally put the name in the. OSS emulation should also be disabled. This means that at least the vmmon module is not loaded. See the systemd services section for automatic loading. Another possible reason is Indirect Branch Tracking on 11th Gen and later Intel processors and starting from kernel 5. See [2] for more details. If you just vmware workstation 14 unsupported cpu detected free back to the prompt when opening vmware workstation 14 unsupported cpu detected free.

This can be fixed by either installing the ncurses5-compat-libs AUR dependency or temporarily allowing root access to X:. Version 14 has stricter CPU requirements than version If you try to start a virtual machine with an affected CPU, the following message will appear:. The solution is to uninstall version 14 and install version 12 vmware-workstation12 AUR. Please try a cold boot shutting the system down and starting it again.

On systems with librsvg version A workaround is to downgrade librsvg to earlier version, or more preferably, force VMware to use its own shipped version of librsvg :. As per [3] the temporary workaround is to downgrade the package libpng to version 1. If the system have installed gcc-libsthat library is already installed. Therefore, it is possible to remove that file and vmplayer will use the one provided by gcc-libs instead. As root do:. Registered bug at Mageiabut it seems that there are no error messages shown in terminal with arch.

Solution is the same, as root do:. An example is the libfontconfig. Check vmware logs in the tmp directory to see which libraries are still not found. Copy them to the appropriate path with libraries existing on the system:. Instead of copying all these files manually, you may want to try exporting an additional setting:. On systems with fontconfig vmware workstation 14 unsupported cpu detected free 2. In such case, it is also necessary to provide a shared object library file libexpat.

This applies for at least VMware version To download the tools manually, visit the VMware repository. If the above does not work, try installing ncurses5-compat-libs AUR. In Marchwith the release of linux 3. When the host CPU frequency changes, the Guest system clock runs too quickly or too slowly, but may also render the whole Guest unbootable. This is likely due to the vmnet module not being loaded [4]. See also the systemd services section for automatic loading.

If your mouse’s thumb buttons or other additional buttons do not work, set guest to use advanced mouse. This is related to the current Xorg keyboard layout on Host system. Keep primary layout e. This issue is related to promiscuous mode which, following standard Linux practice, can only be enabled by the root user. To work around these limitations, the permissions for the networking device in question have to be changed. To uninstall VMware you need the product name either vmware-workstation or vmware-player.

To list all the installed products:. Remember to also disable and remove the services:. Jump to content Namespaces Page Discussion. Views Read View source View history. Check the Processor Requirements for Host Systems. This can be safely ignored, since Arch uses systemd. Tip: To re build the modules from terminal later on, use: vmware-modconfig –console –install-all. Note: The -debug binary informs the user of an incorrect license.

Note: You might need to add the mks. Notes: Not specific to VMware. Discuss in Talk:VMware. Note: Upgrading the kernel and the headers will require you to boot to the new vmware workstation 14 unsupported cpu detected free to match the version of the headers. This is a relatively common error.

Note: libxslt may be required for starting virtual machines. Tip: If kvm modules continue to load, despite being blacklisted, and you are running a system with integrated Intel graphics i,iit may be necessary to blacklist the kvmgt kernel module directly from the kernel command line options. Tip: To periodically correct the time once per minutein the Options tab of VMware Tools, enable: «Time synchronization between the virtual machine and the host operating system».

Tip: Use –console for the console UI. Category : Hypervisors. Hidden category: Pages or sections flagged with Template:Merge.

 
 

Vmware workstation 14 unsupported cpu detected free. vSphere 7.0 unsupported CPUs and ESXi 7.0 hardware requirements

 
 

Products All. Topics All. Sort By: Recent Activity. Show: All Questions. Can it also be passive? Comments 0. Success Answered Comments 1. Zero Client, – Yogesh Dadkar commented – Jun 23, Success Answered Comments 3. Success Answered Comments 2. Success Answered Comments 5. Success Answered Comments 4. Success Answered Comments 6. Success Answered Comments 7. Local Privilege Escalation.

The sensitive information has been moved to encrypted database files. A local privilege escalation vulnerability in MA for Windows prior to 5. Successful exploitation of these vulnerabilities may escalate the permission to the system user.

All installations version 9. Insufficient policy enforcement in Installer in Google Chrome on Windows prior to This issue affects: Bitdefender Update Server versions prior to 3. Bitdefender GravityZone versions prior to Bitdefender Endpoint Security Tools for Linux versions prior to 6. Bitdefender Endpoint Security Tools for Windows versions prior to 7. A vulnerability in Qlik Sense Enterprise on Windows could allow an remote attacker to enumerate domain user accounts.

An attacker could exploit this vulnerability by sending authentication requests to an affected system. A successful exploit could allow the attacker to compare the response time that are returned by the affected system to determine which accounts are valid user accounts. Affected systems are only vulnerable if they have LDAP configured.

This could lead to sensitive files being deleted and potentially cause denial of service. This attack exploits the way symlinks are created and how the product works with them. This issue impacts all versions of Cortex XDR agent without content update or a later content update version. This issue does not impact other platforms or other versions of the Cortex XDR agent. An information exposure through log file vulnerability exists in the Palo Alto Networks GlobalProtect app on Windows that logs the cleartext credentials of the connecting GlobalProtect user when authenticating using Connect Before Logon feature.

This issue impacts GlobalProtect App 5. This issue does not affect the GlobalProtect app on other platforms. This product behavior is intentional and poses no security risk when connecting to trusted GlobalProtect portals configured to use the same Single Sign-On credentials both for the local user account as well as the GlobalProtect login. However when the credentials are different, the local account credentials are inadvertently sent to the GlobalProtect portal for authentication.

A third party MITM type of attacker cannot see these credentials in transit. This vulnerability is a concern where the GlobalProtect app is deployed on Bring-your-Own-Device BYOD type of clients with private local user accounts or GlobalProtect app is used to connect to different organizations. Fixed versions of GlobalProtect app have an app setting to prevent the transmission of the user’s local user credentials to the target GlobalProtect portal regardless of the portal configuration.

This issue impacts: GlobalProtect app 5. An improper link resolution before file access ‘link following’ vulnerability exists in the Palo Alto Networks GlobalProtect app on Windows that enables a local attacker to disrupt system processes and potentially execute arbitrary code with SYSTEM privileges under certain circumstances. GlobalProtect app 5. This issue does not affect GlobalProtect app on other platforms. This issue impacts GlobalProtect app 5.

This issue impacts: Cortex XDR agent 5. An improper link resolution before file access vulnerability exists in the Palo Alto Networks Cortex XDR agent on Windows platforms that enables a local user to delete arbitrary system files and impact the system integrity or cause a denial of service condition.

Tor Browser 9. This could allow local attackers to bypass the intended anonymity feature and obtain information regarding the onion services visited by a local user. This can be accomplished by analyzing RAM memory even several hours after the local user used the product.

This occurs because the product doesn’t properly free memory. In Git for windows through 2. In ListCheck. This vulnerability is due to incorrect handling of directory search paths at run time.

An attacker could exploit this vulnerability by placing a malicious DLL file on the targeted system. This file will execute when the vulnerable application launches. A successful exploit could allow the attacker to execute arbitrary code on the targeted system with local administrator privileges. The ksmbd server through 3. When Windows 10 detects this protocol violation, it disables encryption.

Thinfinity VirtualUI before 3. By accessing the vector, an attacker can determine if a username exists thanks to the message returned; it can be presented in different languages according to the configuration of VirtualUI. Common users are administrator, admin, guest and krgtbt.

This issue only affects Windows. This issue can be exploited by an adversary who has already compromised a valid Windows account on the server via separate means. In this scenario, the compromised account may have inherited read access to sensitive configuration, database, and log files.

Local privilege escalation due to DLL hijacking vulnerability. Local privilege escalation via named pipe due to improper access control checks. Stored cross-site scripting XSS was possible in protection plan details. Stored cross-site scripting XSS was possible in activity details. Cross-site scripting XSS was possible in notification pop-ups. Self cross-site scripting XSS was possible on devices page. DLL hijacking could lead to denial of service. DLL hijacking could lead to local privilege escalation.

A improper initialization in Fortinet FortiClient Windows version 6. An issue was discovered in Reprise RLM Exploitation does not require CVE, because the license file is meant to be changed in the application. As the session cookies are small, an attacker can hijack any existing sessions by bruteforcing the 4 hex-character session cookie on the Windows version the Linux version appears to have 8 characters. An attacker can obtain the static part of the cookie cookie name by first making a request to any page on the application e.

The attacker can then use the name of the cookie and try to request that same page, setting a random value for the cookie. If any user has an active session, the page should return with the authorized content, when a valid cookie value is hit. Allegro WIndows 3. Affected versions of Atlassian Confluence Server and Data Center allow authenticated local attackers to achieve elevated privileges on the local system via a DLL Hijacking vulnerability in the Confluence installer.

The affected versions are before version 7. Prior to version 2. A malicious user can potentially read any file on the file system by crafting a special URL that allows for directory traversal.

This is only possible on a Wiki. Commit number de9dff66ae3ffa9d85 fixes this vulnerability by sanitizing the path before it is passed on to the storage module.

The sanitization step removes any windows directory traversal sequences from the path. As a workaround, disable any storage module with local asset caching capabilities Local File System, Git. Automox Agent before 32 on Windows incorrectly sets permissions on a temporary directory. Automox Agent 33 on Windows incorrectly sets permissions on a temporary directory. An issue was discovered in Kaseya Unitrends Backup Appliance before The Unitrends Windows agent was vulnerable to DLL injection and binary planting due to insecure default permissions.

Due to improper privilege management, the process launches as the logged in user, so memory dump can be done by non-admin also. Remotely, an attacker can dump all sensitive information including DB Connection string, entire IT infrastructure details, commands executed by IT admin including credentials, secrets, private keys and more.

Because of the designed password reset mechanism, any non-admin Windows user can reset the password of the Remote Access Plus Server Admin account.

The installation directory is vulnerable to weak file permissions by allowing full control for Windows Everyone user group non-admin or any guest users , thereby allowing privilege escalation, unauthorized password reset, stealing of sensitive data, access to credentials in plaintext, access to registry values, tampering with configuration files, etc.

The code will run with normal user privileges unless the user specifically runs ShowMyPC as administrator. A misconfiguration in the node default path allows for local privilege escalation from a lower privileged user to the Splunk user in Splunk Enterprise versions before 8. The shell-quote package before 1.

An attacker can inject unescaped shell metacharacters through a regex designed to support Windows drive letters. If the output of this package is passed to a real shell as a quoted argument to a command with exec , an attacker can inject arbitrary commands. Several shell metacharacters exist in the space between capital letter Z and lower case letter a, such as the backtick character. This may allow an authorized local user to insert arbitrary code into the unquoted service path and escalate privileges.

The plugin attempts to prevent PHP and other similar files that could be executed on the server from being uploaded by checking the file extension. It was discovered that on Windows servers, the security checks in place were insufficient, enabling bad actors to potentially upload backdoors on vulnerable sites. A user of a machine protected by SafeNet Agent for Windows Logon may leverage weak entropy to access the encrypted credentials of any or all the users on that machine. An issue was discovered in Allegro Windows formerly Popsy Windows before 3.

This issue affects: Bitdefender Total Security versions prior to Bitdefender Internet Security versions prior to Bitdefender Antivirus Plus versions prior to This also affects the CGI gem before 0.

A vulnerability in Snow Snow Agent for Windows allows a non-admin user to cause arbitrary deletion of files. This issue affects: Snow Snow Agent for Windows version 5. Hangfire is an open source system to perform background job processing in a. NET or. NET Core applications.

No Windows Service or separate process required. Dashboard UI in Hangfire. Core uses authorization filters to protect it from showing sensitive data to unauthorized users. However due to the recent changes, in version 1. Patched versions 1. Please upgrade to the newest version in order to mitigate the issue.

Starting with qutebrowser v1. Only Windows installs where qutebrowser is registered as URL handler are affected. The issue has been fixed in qutebrowser v2. The fix also adds additional hardening for potential similar issues on Linux by adding the new –untrusted-args flag to the.

Composer is an open source dependency manager for the PHP language. In affected versions windows users running Composer to install untrusted dependencies are subject to command injection and should upgrade their composer version. The issue has been resolved in composer versions 1.

There are no workarounds for this issue. An issue was discovered in Listary through 6. Listary will automatically access the named pipe and the attacker will be able to duplicate the victim’s token to impersonate him. This exploit is valid in certain Windows versions Microsoft has patched the issue in later Windows 10 builds. This issue has been addressed in aws-c-io submodule versions 0.

Clementine Music Player through 1. The vulnerability is triggered when the user opens a crafted MP3 file or loads a remote stream URL that is mishandled by Clementine. Attackers could exploit this issue to cause a crash DoS of the clementine. With this highly sensitive data leaked, the attacker would be able to logon to the backend system the SAP GUI for Windows was connected to and launch further attacks depending on the authorizations of the user. This vulnerability is due to incorrect privilege assignment to scripts executed before user logon.

An attacker could exploit this vulnerability by configuring a script to be executed before logon. However, on case-insensitive file systems such as macOS and Windows , this is not the case. Anyone using npm v7. Microsoft introduced a new feature in Windows 10 known as Cloud Clipboard which, if enabled, will record data copied to the clipboard to the cloud, and make it available on other computers in certain scenarios.

Applications that wish to prevent copied data from being recorded in Cloud History must use specific clipboard formats; and Firefox before versions 94 and ESR This could have caused sensitive data to be recorded to a user’s Microsoft account.

Other operating systems are unaffected. Barco MirrorOp Windows Sender before 2. An attacker on the local network can achieve remote code execution on any computer that tries to update Windows Sender due to the fact that the upgrade mechanism is not secured is not protected with TLS.

This is fixed in 3. Acronis Cyber Protect 15 for Windows prior to build allowed local privilege escalation via binary hijacking. Inappropriate implementation in Sandbox in Google Chrome prior to Inappropriate implementation in Navigation in Google Chrome on Windows prior to It was discovered that on Windows operating systems specifically, Kibana was not validating a user supplied path, which would load.

Because of this, a malicious user could arbitrarily traverse the Kibana host to load internal files ending in the. Thanks to Dominic Couture for finding this vulnerability. Local privilege escalation in Windows products of ESET allows user who is logged into the system to exploit repair feature of the installer to run malicious code with higher privileges. Docker Desktop before 3. If a low-privileged account is able to access the server running the Windows containers, it can lead to a full container compromise in both process isolation and Hyper-V isolation modes.

This security issue leads an attacker with low privilege to read, write and possibly even execute code inside the containers. The npm package «tar» aka node-tar before versions 4. These issues were addressed in releases 4. The v3 branch of node-tar has been deprecated and did not receive patches for these issues. If you are still using a v3 release we recommend you update to a more recent version of node-tar.

There is no reasonable way to work around this issue without performing the same path normalization procedures that node-tar now does. Users are encouraged to upgrade to the latest patched versions of node-tar, rather than attempt to sanitize paths themselves. This is, in part, achieved by ensuring that extracted directories are not symlinks. Additionally, in order to prevent unnecessary stat calls to determine whether a given path is a directory, paths are cached when directories are created.

This logic was insufficient when extracting tar files that contained both a directory and a symlink with names containing unicode values that normalized to the same value. Additionally, on Windows systems, long path portions would resolve to the same file system entities as their 8.

A specially crafted tar archive could thus include a directory with one form of the path, followed by a symbolic link with a different string that resolves to the same file system entity, followed by a file using the first form.

By first creating a directory, and then replacing that directory with a symlink that had a different apparent name that resolved to the same entry in the filesystem, it was thus possible to bypass node-tar symlink checks on directories, essentially allowing an untrusted tar file to symlink into an arbitrary location and subsequently extracting arbitrary files into that location, thus allowing arbitrary file creation and overwrite.

If this is not possible, a workaround is available in the referenced GHSA-qqhq3fp. In FreeRDP before 2. This can lead to code execution if a ZIP element’s pathname is set to a Windows startup folder, a file for the inbuilt Out-Going Message function, or a file for the the inbuilt Autodial function. The application deserialises untrusted data without sufficient validations, that could result in an arbitrary deserialization. This could allow an unauthenticated attacker to execute code in the affected system.

This issue affects: Bitdefender GravityZone version 7. Dell SupportAssist Client Consumer versions 3. Symbolic links can be created by any non-privileged user under some object directories, but by themselves are not sufficient to successfully escalate privileges. However, combining them with a different object, such as the NTFS junction point allows for the exploitation.

Support assist clean files functionality do not distinguish junction points from the physical folder and proceeds to clean the target of the junction that allows nonprivileged users to create junction points and delete arbitrary files on the system which can be accessed only by the admin. The Windows version of Multipass before 1. A flaw was found in the hivex library. The highest threat from this vulnerability is to system availability. LINE for Windows 6. OpenVPN before version 2.

An issue was discovered in Digi RealPort for Windows through 4. A buffer overflow exists in the handling of ADDP discovery response messages. This could result in arbitrary code execution. Incorrect Default Permissions vulnerability in the bdservicehost.

Bitdefender Total Security versions prior to 7. Supported versions that are affected are 8. Easily exploitable vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise MySQL Server. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash complete DOS of MySQL Server.

Note: This vulnerability does not apply to Windows systems. An attacker in the local network is able to achieve Remote Code Execution with user privileges of the local user on any device that tries to connect to a WePresent presentation system. Emote Interactive Remote Mouse 3. It binds to local ports to listen for incoming connections. The vulnerability in SolarWinds Pingdom can be described as a failure to invalidate user session upon password or email address change.

When running multiple active sessions in separate browser windows, it was observed a password or email address change could be changed without terminating the user session. This issue has been resolved on September 13, If exploited, a threat actor may be able to gain privileged access to the machine hosting Serv-U Only. Unisys Stealth 5. An unintended executable might run. A flaw was found in the hivex library in versions before 1. An attacker could input a specially crafted Windows Registry hive file which would cause hivex to read memory beyond its normal bounds or cause the program to crash.

TeamViewer before Sensitive information could be logged. A vulnerability in the AppDynamics. This vulnerability is due to the. An attacker with local access to a device that is running the vulnerable agent could create a custom process that would be launched with those SYSTEM privileges.

A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system. This vulnerability is fixed in AppDynamics. NET Agent Release A remote and unauthenticated attacker can bypass cloud authentication to connect and control a system via TCP port and The encryption is done using a hard-coded static key and is therefore reversible by an attacker.

A man in the middle can recover a system’s Personal Key when a client attempts to make a LAN connection. The Personal Key is transmitted over the network while only being encrypted via a substitution cipher. A null pointer dereference vulnerability in Lenovo Power Management Driver for Windows 10, prior to version 1.

A privilege escalation vulnerability in Lenovo Power Management Driver for Windows 10, prior to version 1. PHPMailer before 6.

An unauthenticated attacker with physical access to a computer with NetSetMan Pro before 5. To accomplish this, the attacker can navigate to cmd. A vulnerability was discovered in the Keybase Client for Windows before version 5.

In versions prior to 5. The Zoom Client for Meetings before version 5. This issue could be used to potentially gain insight into arbitrary areas of the product’s memory. This can potentially allow a malicious actor to crash the service or application, or leverage this vulnerability to execute arbitrary code. The Keybase Client for Windows before version 5.

A malicious user could upload a file to a shared folder with a specially crafted file name which could allow a user to execute an application which was not intended on their host machine. If a malicious user leveraged this issue with the public folder sharing feature of the Keybase client, this could lead to remote code execution. The Zoom Client for Meetings for Windows installer before version 5. During the installation process for all versions of the Zoom Client for Meetings for Windows before 5.

If the installer was launched with elevated privileges such as by SCCM this can result in a local privilege escalation. The Zoom Client for Meetings for Windows in all versions before version 5. This could allow for potential privilege escalation if a link was created between the user writable directory used and a non-user writable directory.

The Zoom Client for Meetings for Windows in all versions before 5. This could lead to remote code execution in an elevated privileged context. Tencent GameLoop before 4. Because the only integrity check would be a comparison of the downloaded file’s MD5 checksum to the one contained within the XML document, the downloaded executable would then be executed on the victim’s machine.

PuTTY before 0. NoMachine for Windows prior to version 6. Emby Server is a personal media server with apps on many devices. In Emby Server on Windows there is a set of arbitrary file read vulnerabilities. This vulnerability is known to exist in version 4. For more details including proof of concept code, refer to the referenced GHSL This issue may lead to unauthorized access to the system especially when Emby Server is configured to be accessible from the Internet.

In versions prior to 2. This issue is fixed in versions 2. Acronis True Image prior to Update 4 for Windows allowed local privilege escalation due to improper soft link handling issue 2 of 2. Acronis True Image prior to Update 5 for Windows allowed local privilege escalation due to insecure folder permissions.

Acronis True Image prior to Update 4 for Windows allowed local privilege escalation due to improper soft link handling issue 1 of 2. EmTec ZOC through 8. In other words, it does not implement a usleep or similar delay upon processing a title change.

An elevation of privilege vulnerability in the message broker of BlackBerry Protect for Windows version s versions and earlier could allow an attacker to potentially execute code in the context of a BlackBerry Cylance service that has admin rights on the system. A low privileged delete vulnerability using CEF RPC server of BlackBerry Protect for Windows version s versions and earlier could allow an attacker to potentially execute code in the context of a BlackBerry Cylance service that has admin rights on the system and gaining the ability to delete data from the local system.

A denial of service vulnerability in the message broker of BlackBerry Protect for Windows version s versions and earlier could allow an attacker to potentially execute code in the context of a BlackBerry Cylance service that has admin rights on the system. A user with permission to log on to the machine hosting the AXIS Device Manager client could under certain conditions extract a memory dump from the built-in Windows Task Manager application.

The memory dump may potentially contain credentials of connected Axis devices. In JetBrains TeamCity before The malicious clean. An attacker may exploit the vulnerability to obtain a reverse shell which can lead to privilege escalation to obtain root privileges. The configuration of Archiving through the User interface incorrectly allowed the creation of directories and files in Windows system directories and other locations where sensitive data could be overwritten.

Improper access control vulnerability in the repair process for McAfee Agent for Windows prior to 5. This would result in elevation of privileges and the ability to execute arbitrary code as the system user, through not correctly protecting a temporary directory used in the repair process and not checking the DLL signature.

This is caused by the destination buffer being of fixed size and incorrect checks being made on the source size. This would result in the user gaining elevated permissions and the ability to execute arbitrary code as the system user, through not checking the DLL signature. A vulnerability in the preloading mechanism of specific dynamic link libraries in McAfee Agent for Windows prior to 5. To exploit this vulnerability, the attacker would need to have valid credentials on the Windows system.

This would result in the user gaining elevated permissions and being able to execute arbitrary code. Improper privilege management vulnerability in McAfee Agent for Windows prior to 5. This allows a local user to either add false events or remove events from the event logs prior to them being sent to the ePO server. Improper privilege management vulnerability in maconfig for McAfee Agent for Windows prior to 5.

The utility was able to be run from any location on the file system and by a low privileged user. When the Windows Tentacle docker image starts up it logs all the commands that it runs along with the arguments, which writes the Octopus Server API key in plaintext.

This does not affect the Linux Docker image. Aviatrix VPN Client before 2. A successful exploit could allow an attacker to view user information and application data. Within the Open-AudIT up to version 3. By using Developer tools or similar, it is possible to change the obfuscation so that the credentials are visible. Go before 1. Multiple memory corruption issues were addressed with improved memory handling. This issue is fixed in iOS Processing maliciously crafted web content may lead to arbitrary code execution.

This issue was addressed with improved checks. This issue is fixed in Security Update Catalina, iTunes Use after free in dialog box handling in Windows in Google Chrome prior to Use after free in sensor handling in Google Chrome on Windows prior to A stack-based buffer overflow vulnerability exists in the Palo Alto Networks GlobalProtect app that enables a man-in-the-middle attacker to disrupt system processes and potentially execute arbitrary code with SYSTEM privileges.

Ivanti Avalanche Premise 6. Zoom Chat through on Windows and macOS allows certain remote authenticated attackers to execute arbitrary code without user interaction. An attacker must be within the same organization, or an external party who has been accepted as a contact. Cortex XDR agent 5. Content updates are required to resolve this issue and are automatically applied for the agent. This requires the user to have the privilege to create files in the Windows root directory or to manipulate key registry values.

Kaseya VSA before 9. By default Kaseya VSA on premise offers a download page where the clients for the installation can be downloaded. When drawing text onto a canvas with WebRender disabled, an out of bounds read could occur. This could be used to prevent the browser update service from operating if an attacker spammed the ‘Stop’ command ; but also exposed attack surface in the maintenance service.

In Gradle before version 7. Gradle builds could be vulnerable to a local privilege escalation from an attacker quickly deleting and recreating files in the system temporary directory. If you are on Windows or modern versions of macOS, you are not vulnerable. If you are on a Unix-like operating system with the «sticky» bit set on your system temporary directory, you are not vulnerable.

The problem has been patched and released with Gradle 7. As a workaround, on Unix-like operating systems, ensure that the «sticky» bit is set. This only allows the original user or root to delete a file. The new path needs to limit permissions to the build user only. For additional details refer to the referenced GitHub Security Advisory.

An issue was discovered in PortSwigger Burp Suite before During viewing of a malicious request, it can be manipulated into issuing a request that does not respect its upstream proxy configuration.

By adding files to an existing installation’s directory, a local attacker could hijack accounts of other users running Erlang programs or possibly coerce a service running with «erlsrv. This can occur only under specific conditions on Windows with unsafe filesystem permissions. This vulnerability could be exploited locally by a user with high privileges to execute malware that may lead to a loss of confidentiality, integrity, and availability.

In Ruby through 3. It will execute git. In Chris Walz bit before 1. The text-to-speech engine in libretro RetroArch for Windows 1. Mintty before 3. MobaXterm before The affected component can be abused to execute the malicious software inserted by the attacker with the elevated privileges of the component.

This vulnerability results from the affected component searching for run-time artifacts outside of the installation hierarchy. Zoom through 5. When a user shares a specific application window via the Share Screen functionality, other meeting participants can briefly see contents of other application windows that were explicitly not shared. The contents of these other windows can for instance be seen for a short period of time when they overlay the shared window and get into focus.

An attacker can, of course, use a separate screen-recorder application, unsupported by Zoom, to save all such contents for later replays and analysis.

Depending on the unintentionally shared data, this short exposure of screen contents may be a more or less severe security issue. Web Firewall A DLL for a custom payload within a legitimate binary e. All versions before 7. Agents for Windows and Cloud are not affected. ConnectSecure on Windows is affected. An insecure client auto update feature in C-CURE can allow remote execution of lower privileged Windows programs.

BMP files received from untrusted sources in SAP 3D Visual Enterprise Viewer, the application crashes and becomes temporarily unavailable to the user until restart of the application. Snow Inventory Agent through 6. A privilege-escalation vulnerability exists if CPUID is enabled, and thus it should be disabled via configuration settings.

The Terminate Session feature in the Telegram application through 7. A denial-of-service issue existed in one of modules that was incorporated in Kaspersky Anti-Virus products for home and Kaspersky Endpoint Security. A local user could cause Windows crash by running a specially crafted binary module. The fix was delivered automatically.

An issue was discovered in Visualware MyConnection Server before v This application is written in Java and is thus cross-platform. Cleartext transmission of sensitive information in Netop Vision Pro up to and including 9. Local privilege escalation vulnerability in Windows clients of Netop Vision Pro up to and including 9.

A local authenticated escalation of privilege vulnerability was discovered in Aruba ClearPass Policy Manager version s : Prior to 6. A vulnerability in ClearPass OnGuard could allow local authenticated users on a Windows platform to elevate their privileges. In VembuBDR before 4. An attacker could replace the. A missing input validation in Samsung Flow Windows application prior to Version 4. In SolarWinds Serv-U before An unprivileged Windows user having access to the server’s filesystem can add an FTP user by copying a valid profile file to this directory.

The Cost Calculator WordPress plugin through 1. M1 to 9. An issue was discovered in Devolutions Server before There is Broken Authentication with Windows domain users. This is achieved by launching applications, suspending them, modifying the memory and restarting them when they are monitored by McAfee DLP through the hdlphook driver. This is triggered by the hdlphook driver reading invalid memory.

This varies by machine and had partial protection prior to this update. This is only applicable to clean installations of ENS as the Access Control rules will prevent modification prior to up an upgrade. To exploit this, the local user has to access the relevant memory location immediately after an ENS administrator has made a configuration change through the console on their machine.

Keybase Desktop Client before 5. Local filesystem access is needed by the attacker. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash complete DOS of Oracle VM VirtualBox. On version 7. Addressing this issue requires both the client and server fixes. In Edge Client version 7. User interaction is required to exploit this vulnerability in that the victim must run this utility on the Windows system.

More specifically, improper configuration of permissions in the installation directory allows an attacker to perform two different escalation attacks: PATH and DLL hijacking. Brave Browser Desktop between versions 1. A buffer overflow vulnerability exists in Windows File Resource Profiles in 9.

X allows a remote authenticated user with privileges to browse SMB shares to execute arbitrary code as the root user. As of version 9. A command injection vulnerability exists in Pulse Connect Secure before 9. Pulse Connect Secure 9. This vulnerability has been exploited in the wild. RabbitMQ installers on Windows prior to version 3.

A malicious actor with non-administrative access to vCenter Server may exploit this issue to elevate privileges to a higher privileged group. On Windows, the uninstaller binary copies itself to a fixed temporary location, which is then executed the originally called uninstaller exits, so it does not block the installation directory.

This temporary location is not randomized and does not restrict access to Administrators only so a potential attacker could plant a binary to replace the copied binary right before it gets called, thus gaining Administrator privileges if the original uninstaller was executed as Administrator. The vulnerability only affects Windows installers. Under certain circumstances, when manipulating the Windows registry, InstallBuilder uses the reg.

The full path to the command is not enforced, which results in a search in the search path until a binary can be identified. VMware Thinapp version 5. A malicious actor with non-administrative privileges may exploit this vulnerability to elevate privileges to administrator level on the Windows operating system having VMware ThinApp installed on it.

A malicious actor with access to a virtual machine or remote desktop may be able to exploit these issues leading to information disclosure from the TPView process running on the system where Workstation or Horizon Client for Windows is installed. An attacker can provide a malicious file to trigger this vulnerability. In PHP versions 7. The file browser in Jenkins 2. Jenkins 2. A local authenticated malicious user with low privileges may potentially exploit this vulnerability to bypass the restricted environment and perform unauthorized actions on the affected system.

A remote unauthenticated attacker could potentially exploit this vulnerability to gain admin access on the affected system. When security guidelines for SAP NetWeaver Master Data Management running on windows have not been thoroughly reviewed, it might be possible for an external operator to try and set custom paths in the MDS server configuration.

When no adequate protection has been enforced on any level e. Under certain conditions the attacker can access information which would otherwise be restricted.

The exploit can only be executed locally on the client PC and not via Network and the attacker needs at least user authorization of the Operating System user of the victim. Jellyfin is a Free Software Media System. In Jellyfin before version This issue is more prevalent when Windows is used as the host OS. Servers that are exposed to the public Internet are potentially at risk. This is fixed in version As a workaround, users may be able to restrict some access by enforcing strict security permissions on their filesystem, however, it is recommended to update as soon as possible.

Brave is an open source web browser with a focus on privacy and security. In Brave versions 1. This is fixed in Brave version 1. Git is an open-source distributed revision control system. The problem has been patched in the versions published on Tuesday, March 9th, As a workaound, if symbolic link support is disabled in Git e. As always, it is best to avoid cloning repositories from untrusted sources.

The earliest impacted version is 2. The fix versions are: 2. Traccar is an open source GPS tracking system. In Traccar before version 4.

Only Windows versions are impacted. Attacker needs write access to the filesystem on the host machine. If Java path includes a space, then attacker can lift their privilege to the same as Traccar service system.

This is fixed in version 4. Git LFS is a command line extension for managing large files with Git. This is the result of an incomplete fix for CVE This issue occurs because on Windows, Go includes and prefers the current directory when the name of a command run does not contain a directory separator.

Other than avoiding untrusted repositories or using a different operating system, there is no workaround. This is fixed in v2. Use after free in Downloads in Google Chrome on Windows prior to InCopy version Exploitation of this issue requires user interaction in that a victim must open a malicious file. A malicious 3rd party with local access to the Windows machine where MongoDB Compass is installed can execute arbitrary software with the privileges of the user who is running MongoDB Compass.

This issue affects: MongoDB Inc. MongoDB Compass 1. A flaw was found in samba. The code that performs this had a flaw that could allow it to read data beyond the end of the array in the case where a negative cache entry had been added to the mapping cache. This could cause the calling code to return those values into the process token that stores the group membership for a user.

The highest threat from this vulnerability is to data confidentiality and integrity. Supported versions that are affected are 18c and 19c.

Difficult to exploit vulnerability allows unauthenticated attacker with network access via Oracle Net to compromise Advanced Networking Option. Successful attacks require human interaction from a person other than the attacker and while the vulnerability is in Advanced Networking Option, attacks may significantly impact additional products.

Successful attacks of this vulnerability can result in takeover of Advanced Networking Option. Note: CVE affects Windows platform only. When ADSSP is configured with multiple Windows domains, a user from one domain can obtain the password policy for another domain by authenticating to the service and then sending a request specifying the password policy file of the other domain.

This allows an unauthenticated remote attacker to determine whether a Windows domain user exists. Nessus Agent 8. This is different than CVE A memory initialization issue was addressed with improved memory handling.

Processing maliciously crafted web content may disclose sensitive user information. An input validation issue was addressed with improved input validation. Processing maliciously crafted web content may lead to a cross site scripting attack. Processing a maliciously crafted font may result in the disclosure of process memory. A vulnerability in Cisco Packet Tracer for Windows could allow an authenticated, local attacker to perform a DLL injection attack on an affected device. To exploit this vulnerability, the attacker must have valid credentials on the Windows system.

This vulnerability is due to incorrect handling of directory paths at run time. An attacker could exploit this vulnerability by inserting a configuration file in a specific path on the system, which can cause a malicious DLL file to be loaded when the application starts. Multiple vulnerabilities in Cisco Jabber for Windows, Cisco Jabber for Mac, and Cisco Jabber for mobile platforms could allow an attacker to access sensitive information or cause a denial of service DoS condition.

For more information about these vulnerabilities, see the Details section of this advisory. A vulnerability in Cisco AnyConnect Secure Mobility Client for Windows could allow an authenticated, local attacker to cause a denial of service DoS condition on an affected system. This vulnerability is due to uncontrolled memory allocation. An attacker could exploit this vulnerability by copying a crafted file to a specific folder on the system. A successful exploit could allow the attacker to crash the VPN Agent service when the affected application is launched, causing it to be unavailable to all users of the system.

To exploit this vulnerability, the attacker must have valid credentials on a multiuser Windows system. This vulnerability is due to a race condition in the signature verification process for DLL files that are loaded on an affected device.

An attacker could exploit this vulnerability by sending a series of crafted interprocess communication IPC messages to the AnyConnect process. A successful exploit could allow the attacker to execute arbitrary code on the affected device with SYSTEM privileges.

An attacker could exploit this vulnerability by inserting a configuration file in a specific path in the system, which can cause a malicious DLL file to be loaded when the application starts. A successful exploit could allow the attacker to execute arbitrary code on the affected system with the privileges of another user account. A vulnerability in Cisco Webex Player for Windows and MacOS could allow an attacker to cause the affected software to terminate or to gain access to memory state information that is related to the vulnerable application.

An attacker could exploit this vulnerability by sending a malicious WRF file to a user as a link or email attachment and then persuading the user to open the file with the affected software on the local system. A successful exploit could allow the attacker to crash the affected software and view memory state information.

An attacker could exploit this vulnerability by sending a user a malicious WRF file through a link or email attachment and persuading the user to open the file with the affected software on the local system.

A successful exploit could allow the attacker to execute arbitrary code on the affected system with the privileges of the targeted user.

An attacker could exploit this vulnerability by sending a user a malicious ARF or WRF file through a link or email attachment and persuading the user to open the file with the affected software on the local system. An attacker could exploit the vulnerability by sending a user a malicious ARF or WRF file through a link or email attachment and persuading the user to open the file.

Multiple vulnerabilities in the install, uninstall, and upgrade processes of Cisco AnyConnect Secure Mobility Client for Windows could allow an authenticated, local attacker to hijack DLL or executable files that are used by the application. To exploit these vulnerabilities, the attacker must have valid credentials on the Windows system. Multiple vulnerabilities in Cisco Jabber for Windows, Cisco Jabber for MacOS, and Cisco Jabber for mobile platforms could allow an attacker to execute arbitrary programs on the underlying operating system with elevated privileges, access sensitive information, intercept protected network traffic, or cause a denial of service DoS condition.

To exploit this vulnerability, the attacker would need valid credentials on the system. The vulnerability is due to insufficient validation of directory search paths at run time. An attacker could exploit this vulnerability by placing a malicious DLL file on an affected system. A vulnerability in Cisco Webex Meetings Desktop App and Webex Productivity Tools for Windows could allow an authenticated, local attacker to gain access to sensitive information on an affected system.

This vulnerability is due to the unsafe usage of shared memory by the affected software. An attacker with permissions to view system memory could exploit this vulnerability by running an application on the local system that is designed to read shared memory.

A successful exploit could allow the attacker to retrieve sensitive information from the shared memory, including usernames, meeting information, or authentication tokens.

Note: To exploit this vulnerability, an attacker must have valid credentials on a Microsoft Windows end-user system and must log in after another user has already authenticated with Webex on the same end-user system. This vulnerability is due to insufficient validation of resources that are loaded by the application at run time. An attacker could exploit this vulnerability by sending a crafted IPC message to the AnyConnect process. A successful exploit could allow the attacker to execute arbitrary code on the affected machine with SYSTEM privileges.

To exploit this vulnerability, the attacker needs valid credentials on the Windows system. To exploit this vulnerability, the attacker would need valid credentials on the Windows system. A successful exploit could allow the attacker to execute arbitrary code on the targeted system with SYSTEM privileges.

A vulnerability in the loading process of specific DLLs in Cisco Proximity Desktop for Windows could allow an authenticated, local attacker to load a malicious library. An attacker could exploit this vulnerability by placing a malicious DLL file in a specific location on the targeted system. The vulnerability is due to insufficient validation of resources that are loaded by the application at run time.

An attacker could exploit this vulnerability by inserting a configuration file in a specific path in the system which, in turn, causes a malicious DLL file to be loaded when the application starts. Windows contains a vulnerability in the kernel mode layer nvlddmkm. NVIDIA GPU Display Driver for Windows and Linux contains a vulnerability in firmware where the driver contains an assert or similar statement that can be triggered by an attacker, which leads to an application exit or other behavior that is more severe than necessary, and may lead to denial of service or system crash.

NVIDIA GPU Display driver for Windows contains a vulnerability where an unprivileged user can create a file hard link that causes the driver to overwrite a file that requires elevated privilege to modify, which could lead to data loss or denial of service. Attacker does not have any control over the information and may conduct limited data modification. This attack requires a user with system administration rights to execute the installer and requires the attacker to replace the files in a very short time window between file integrity validation and execution.

Such an attack may lead to code execution, escalation of privileges, denial of service, and information disclosure. Improper verification of cryptographic signature in the installer for some Intel R Wireless Bluetooth R and Killer TM Bluetooth R products in Windows 10 may allow an authenticated user to potentially enable denial of service via local access.

Improper access control in the installer for some Intel R Wireless Bluetooth R and Killer TM Bluetooth R products in Windows 10 may allow an authenticated user to potentially enable escalation of privilege via local access. A memory corruption issue was addressed with improved state management.

This issue is fixed in macOS Big Sur Processing a maliciously crafted text file may lead to arbitrary code execution. A remote attacker may be able to cause a denial of service. A use after free issue was addressed with improved memory management.

This issue is fixed in watchOS 7. Processing a maliciously crafted file may lead to arbitrary code execution. An out-of-bounds write issue was addressed with improved bounds checking. Processing maliciously crafted XML may lead to an unexpected application termination or arbitrary code execution.

Processing maliciously crafted web content may lead to universal cross site scripting. A buffer overflow issue was addressed with improved memory handling. A URL Unicode encoding issue was addressed with improved state management. A malicious attacker may be able to conceal the destination of a URL.

An access issue existed in Content Security Policy. This issue was addressed with improved access restrictions. Processing maliciously crafted web content may prevent Content Security Policy from being enforced. Multiple issues were addressed with improved logic.